What you need:
1. Phillips screwdriver
2. Instrument panel
3. Pick tool
4. Fall light
5. Wire ties
6. Electrical tape
7. Wire cutters
8. Conditioner
9. Drop cloths
Note: Remove the old stereo before you start!
More notes:
You must ensure that the battery because you can not connect to the stream when you install the speakers not lose. It can also prevent injuries intrial.
Take all the hardware that came in the box.
There will be speakers factory. Instructions to imagine the speakers would come in the factory manual that came with your car. If you do this tutorial, I propose to call the manufacturing sector.
Wheelbase:
o To begin, you will see the flat head screwdriver required. With this tool you can check your old vines, like the old factory speakers in the hands of those lives.
O ismust pull the wires from the lighter. It will help with the installation of other speakers.
O Connect the cable to the cigarette lighter.
Or, you must turn on the ignition and then select the wire under the dashboard.
Replace the meter or the light for the ignition. The lights turn on.
Now, or search for the electric cable coming from your stereo. This has led the forces of one of the stereo. YesWrapping the head with a black electrical tape so as not to touch any metal surface.